Magnetic Components:

Magnetic Ferrous Traps
Code : Erich-Magnetic-MC-001
Description : These are suitable for liquid filtration and separation in pipe line. The magnetic tubes with in the trap catch the tramp Iron/fine iron contamination in a product a it flows through the processing line there by protecting product purity and preventing abrasive wear,prevents pumps from jamming, reduced damage and maintenance to mixers, refiners, filters, pumps etc. end assures a product free of iron contamination.

The special design enables quick release of magnetic tubes for easily inspection and cleaning, Sizes for pipelines from 1/2” through 18” (13-450 mm)- ferrite, Alnico and Rare -earth magnetic tubes. Miled steel and or stainless steel fabricated construction.

Magnetic Coolant Cleaners
Code : Erich-Magnetic-MC-002
Description : Erich magnetic coolant cleaner is a continuous cleaning magnetic separator that removes ferrous material from the coolant flow and deposits it into a disposable bin.
Erich magnetic coolant cleaners prove the best tools to remove fine ferrous chips or grindings from machine coolant systems, thereby ensuring accurate grinding, improved life of coolant and cutting tools. Available in capacities from 50 to 1000 litres per minutes

Magnetic Funnel Filters
Code : Erich-Magnetic-MC-003
Description : Erich Permanent magnetic Funnel Type fitters are available with single, dual and multiple magnetic elements for higher capacities. The magnetic assemblies are so designed that the majority of trapped iron particles do not interfare with the line of low. The rate of flow in therefore not reduced. The magnetic assemblies in these filters are readily removed and very easily cleaned Available in ferrite, Alnica and high power Rare – earth magnets and complete stainless steel 304 construction

A Range of Electro magnetic ferrous filters specially designed for ceramic slurries and glazes to separate fine iron particles fine iron particles, scales etc. in also available.

Magnetic Base & V Block
Code : Erich-Magnetic-MC-004
Description : Erich Magnetic Bases are the most universal type of dial gauge indicator holder. The base and two sides are energized for gripping of flat surface and a vee- slot enables the base to hold on round surfaces . The exclusive push – button control turning On and OFF allows one hundred location of the base on any machine tool . If required a scriber can be fitted in place of dial indicator. A regulator type ON and OFF system is also available.

Magnetic 'V' Blocks used in Tool Rooms for drilling , grinding of round Jobs. The 'V' Block has total three magnetic surfaces. Top and Bottom with 90° 'V' angle and end surface opposite to switch. All three magnetic surfaces and the two sides are carefully ground, when turned ON all three magnetic surfaces are activated simultaneously. The permanent magnet holds the work firmly in the 'V' .